Stichting Club Alfa Romeo Bezitters

hoi allemaal,

ik zoek voor mijn 155 van '94 LM velgen, en wil graag weten wat er onder past.

weet iemand de maten zoals steek en naaf diameter en welke merken van auto eronder past.

Steek 4x 98, ET waarde uit mijn hoofd 38...

17 inch met 205-40-17 past zowizo..

misschien een rare vraag, maar wat is ET waarde?

Einpress Tiefe
UTFS

http://www.chris-longhurst.com/carbible ... bible.html

Inset or outsetThis is very important. Ignore this and you can end up with all manner of nasty problems. This is the distance in mm between the centreline of the wheel rim, and the line through the fixing face. You can have inset, outset or neither. This determines how the suspension and self-centring steering behave. The most obvious problem that will occur if you get it wrong is that the steering will either become so heavy that you can't turn the car, or so light that you need to spend all your time keeping the bugger in a straight line. More mundane problems through ignoring this measurment can range from wheels that foul parts of the bodywork or suspension, to high-speed judder in the steering because the suspension setup can't handle that particular type of wheel. This figure will be stamped on the wheel somewhere as an ET figure.

Dre, jij bent volgens mij zo'n beetje onze wandelende winkler-prins. Op elke vraag een antwoord.